CALIDUS ePOD Interfacing
From EPOD
Solution Overview
CALIDUS ePOD provides an electronic proof of delivery execution layer to existing TMS systems or a stand-alone execution and basic Admin layer for stand-alone customers.
For those customers who require an interface into and out of CALIDUS ePOD, a standard interface format is defined here.
The layout of the CALIDUS ePOD system is as follows:
Most of the tables in the structure can be configured through the interface with the exception of:
- Job Group
- User Access Group
- Service Vehicle Product
As can be seen, the basic structure is:
- Load - a collection of jobs of any type to be completed by the PDA user.
- Job - a specific task for a customer (i.e. collect order A from point X at this time, deliver order A to point Y at this time).
- Container - any unique item to be delivered, for example, bar-coded pallets, cartons, packages, trolleys, A-frames, etc.
- Product - any product to be delivered, plus a quantity. Can be contained within the containers, or can be Loose products.
Notes:
- Each Load or Work List will be assigned to a user for completion. Many can be created and assigned to users - only the earliest will be active.
- Each job will be listed in sequence, or planned start time. It is configurable whether the user is forced to complete tasks in sequence.
- Each container and product must be actioned by the user (i.e. enter/scan each container for delivery, or say why each container was not delivered).
- If a container has products, each of these must be actioned by the user. It is configurable whether products are required to be entered.
- If products are defined without a container (i.e. Loose Products), they must be entered. CALIDUS ePOD assumes a Loose Product container of '000000000000', so that the table data structure is preserved.
Scope
There are interfaces into CALIDUS ePOD for Standing Data.
Note: It is not deemed necessary at this time to map interfaces from the TMS for Standing Data, as this can be maintained separately and manually within CALIDUS ePOD. Those flows are:
- Vehicles
- Reason Codes (used when cancelling jobs or pallets)
- Users (Drivers/Engineers)
- Customers
The system can be configured to automatically create the Vehicles and Users with very basic information based off the received values in the Load and Job messages. Customers will be created as part of the information received through the Job messages.
Note: The document does not at this time define the interface required for Service-type jobs, as this is currently in significant development within the product. A basic interface does exist and is described in detail in the supporting documentation, referenced in the appendices.
Functional Description
Import of data into the system can be through several mechanisms:
- Web Services standard interface
- Bespoke manual file upload, through CSV or Microsoft Excel file
- Bespoke automatic file upload, through CSV, XML or Microsoft Excel file
The Web Services are hosted as part of the main CALIDUS ePOD server and run as SOAP or HTML Web Services. Data is formatted in a strongly-typed XML file, validated by a full XSD. Data can be passed either as a string or as an XML object.
The data defined in this XSD can be modified by development for customers who require additional data sent to and from the CALIDUS ePOD system.
The Bespoke automatic and manual file uploads are written on demand for customers who require it.
The standard Web Services import interface supports:
- Loads
- Jobs (stand-alone or within a Load)
- Collections
- Deliveries
- Containers (Pallets, boxes, etc)
- Products (both within containers and loose products)
- Services
- Standing Data
- Users
- Vehicles
- Service Products
- Customers
- Reason Codes
Export of data from the system can be through several mechanisms:
- Request of data from a Web Service
- Auto-export of data
- Palletforce Extract
Web Services are supplied for external systems to request information on Loads and Jobs, by ID or Date Since. The Web Services are hosted as part of the main CALIDUS ePOD server and run as SOAP or HTML Web Services. Response Data is formatted in a strongly-typed XML file, validated by a full XSD.
Standard requested data to export supports:
- Loads (including all Jobs underneath) by ID or Date
- Jobs by ID or Date
- Current Vehicle information
Auto-export of data can be configured to push the XML data automatically to the client system, via 2 mechanisms:
- Web Service
- Flat-file copy, local, remote or FTP
If configured as a Web Service, the Auto-Export process will connect to the defined web service and push the data to it in the XML format defined above. If configured as an Email address, the XML file will be emailed to the defined address.
This process can also (if configured) automatically produce and email Completion Documents (defined POD, POC or Service reports) to customers, on successful completion of a job.
The Auto-export process supports:
- Automatic emailing of Completion reports to customers (if configured)
- Load (header or with all Job information)
- Jobs (Completed or Cancelled) with all details
- Palletforce
- OEM bespoke interfaces
- Other OBS Logistics products
The Auto-Export process is run as a scheduled task on the main CALIDUS ePOD server.
Message Content
A basic list if all the fields in the interface for Load (Manifest) and Job follows. A full spreadsheet of all the import flows and fields containing all the limitations on length and defaulted values is provided separately.
EPOD_LOAD
| Name | Description | External Field | Notes |
| EPL_SITE_ID | EPL_SITE_ID: Unique reference of the site that the Load belongs to. | ||
| EPL_LOAD_ID | EPL_LOAD_ID: Unique reference of the Load. | ||
| EPL_LOAD_START_PLANNED_DATE | The planned start date and time. This is used to sequence the load, and decide which load is provided to the user. | These times will be defaulted by the EPOD system to the earliest and latest dates and times against the jobs provided, unless this information can be provided by the TMS | |
| EPL_LOAD_START_PLANNED_TIME | |||
| EPL_LOAD_END_PLANNED_DATE | The planned end date and time | ||
| EPL_LOAD_END_PLANNED_TIME | |||
| EPL_LOAD_DISTANCE_PLANNED | The distance planned by the route planner | N/A | |
| EPL_USER_ID | To be used if a user is predefined as assigned to complete this Load. | ||
| EPL_VEHICLE_ID | To be used if a vehicle is predefined as assigned to complete this Load. | ||
| EPOD_JOBS | EPOD_JOBS contains a series of EPOD_JOB objects. |
EPOD_JOB
| Name | Description | External Field | Notes |
| EPL_SITE_ID | Unique Reference for the Site that the Job belongs to | ||
| EPL_LOAD_ID | Unique Reference for the Load that the Job belongs to. If not provided, defaulted from the enclosing EPOD_LOAD | ||
| EPL_JOB_ID | Unique reference for the job. If not provided, this will be generated by EPOD | Omitted - generated by EPOD | |
| EPL_JOB_CODE | External reference for the Job. This element can be used to link a collection and delivery together under the same reference. So, if an order is being collected at A and delivered at B, there are 2 jobs, each with a unique Job ID, but with the same Job Code. Optionally, EPOD will keep the Delivery leg of a linked job updated with the information captured from the collection. | ||
| EPL_JOB_TYPE | D=Delivery, C=Collection, S=Service | "C" or "D" | |
| EPL_JOB_GROUP | |||
| EPL_CUST_REF | Customer's Order Reference | ||
| EPL_JOB_INSTRUCTION | Instructions for the Driver | ||
| EPL_OFFICE_INSTRUCTION | Instructions for Admin staff | ||
| EPL_START_PLANNED_DATE | |||
| EPL_START_PLANNED_TIME | |||
| EPL_END_PLANNED_DATE | |||
| EPL_END_PLANNED_TIME | |||
| EPL_DISTANCE_PLANNED | |||
| EPOD_CUSTOMER | This tag may be used to specify a Customer separately. If this is used, and the address and contact information on the job below is different, the EPOD system will create a Job Address specifically for this job, whilst maintaining the Customer information separately, as an Invoice address. Note that this will happen if the Customer has been created previously either through another Job, another Customer Tag in a Job or a Customer Tag alone. | ||
| EPL_CUSTOMER_CODE | Customer Code from external system. If not provided, one will be generated from EPL_CUSTOMER_NAME | ||
| EPL_CUSTOMER_NAME | The Name of the customer | ||
| EPL_ADDRESS_1 | |||
| EPL_ADDRESS_2 | |||
| EPL_ADDRESS_3 | |||
| EPL_ADDRESS_4 | |||
| EPL_ADDRESS_5 | |||
| EPL_POSTCODE | |||
| EPL_CONTACT | Contact on site for the job. Can be changed at Job completion. | ||
| EPL_TELEPHONE | The Customer's Contact Telephone number | ||
| EPL_EMAIL | Contact Email address. Can be used to automatically send Job Completion documents to the customer. | ||
| EPL_OWNER_NAME | Can be used as a display field for documentation | ||
| EPL_SO_NUMBER | Sales Order Reference. | ||
| EPL_ORDER_DATE | Date Order created - defaulted to Now() | ||
| EPL_SALES_CONTACT | The operative who took the order. Can be used as a display field for documentation | ||
| EPL_SERVICE_LEVEL | |||
| EPL_SEQUENCE | The sequence in which the jobs are to be completed. If this is not provided, the system will allocate the jobs in the sequence in which they were provided in this interface i.e. first is "0001", second is "0002", etc. | ||
| EPOD_CONTAINERS | Contains a series of EPOD_CONTAINER objects | ||
| EPOD_PRODUCTS | Contains a series of EPOD_PRODUCT objects | ||
| EPOD_SERVICE |
EPOD_CONTAINER
| Name | Description | External Field | Notes |
| EPL_SITE_ID | |||
| EPL_JOB_ID | From Job record | ||
| EPL_CONTAINER_ID | EPL_CONTAINER_ID: The unique identifier for a container. | . | |
| EPL_SEQUENCE | The sequence in which the containers should be unloaded. | ||
| EPL_CONTAINER_PACKAGE_CODE | Container Type Code | ||
| EPL_CONTAINER_PACKAGE_DESC | Container Type Description | ||
| EPL_GROSS_WEIGHT | Gross weight of the container | ||
| EPL_DESCRIPTION_LONG | Long description of the container | ||
| EPL_CODE_1 | Additional code field used for any purpose | ||
| EPL_CODE_2 | Additional code field used for any purpose | ||
| EPL_CODE_3 | Additional code field used for any purpose | ||
| EPOD_PRODUCTS | EPOD_PRODUCTS contains a series of EPOD_PRODUCT objects associated to the container. |
EPOD_PRODUCT
| Name | Description | External Field | Notes |
| EPL_SITE_ID | Unique Reference for the Site that the Job belongs to | ||
| EPL_JOB_ID | Unique reference for the job. If not provided on Import, this will be generated by EPOD | ||
| EPL_CONTAINER_ID | EPL_CONTAINER_ID: The unique identifier for a cotainer. | ||
| EPL_PRODUCT_CODE | The unique identifier for the product delivered/collected | ||
| EPL_SEQUENCE | A unique sequence for the product. | ||
| EPL_CUST_REF | Customer's Order Reference | ||
| EPL_DESCRIPTION | A 40-character description of the product | ||
| EPL_PRODUCT_QTY_PLANNED | The quantity of the product to be delivered/collected | ||
| EPL_PRODUCT_QTY_ORDERED | The quantity of the product ordered. | ||
| EPL_ITEM_TYPE | A group defining the Product Type. | ||
| EPL_UNIT_TYPE | The Product UOM. | ||
| EPL_DESCRIPTION_LONG | A 255 character long description. Can be used to extend the description above. | ||
| EPL_PRODUCT_WEIGHT | The item weight of this product |
Notes:
- The jobs should be sent through in the order in which they should be completed. The Sequence field should be sent with a numeric padded value as described in the description.
- Loads and the contained jobs will be sent as one message. Multiple loads can be built into one XML message structure.
- XSDs for validating the XML structure will be provided.
A sample of a single load with multiple jobs of many types are shown below - a brief description of the job type is shown in the office instructions:
<EPOD_IMPORT EPL_SITE_ID="TEST" EPL_USER_ID="ADM" EPL_USER_PASSWORD="TEST">
<EPOD_LOADS>
<EPOD_LOAD>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_LOAD_ID>TEST001</EPL_LOAD_ID>
<EPL_LOAD_START_PLANNED_DATE>20120320</EPL_LOAD_START_PLANNED_DATE>
<EPL_LOAD_START_PLANNED_TIME>16450000</EPL_LOAD_START_PLANNED_TIME>
<EPL_LOAD_END_PLANNED_DATE>20120320</EPL_LOAD_END_PLANNED_DATE>
<EPL_LOAD_END_PLANNED_TIME>16590000</EPL_LOAD_END_PLANNED_TIME>
<EPL_LOAD_DISTANCE_PLANNED>212</EPL_LOAD_DISTANCE_PLANNED>
<EPL_USER_ID></EPL_USER_ID>
<EPOD_JOBS>
<EPOD_JOB>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_LOAD_ID>TEST001</EPL_LOAD_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_JOB_CODE>TEST001001</EPL_JOB_CODE>
<EPL_JOB_TYPE>C</EPL_JOB_TYPE>
<EPL_JOB_GROUP>JG01</EPL_JOB_GROUP>
<EPL_CUST_REF>CR-TEST001001</EPL_CUST_REF>
<EPL_JOB_INSTRUCTION>Free Text Instructions</EPL_JOB_INSTRUCTION>
<EPL_OFFICE_INSTRUCTION>Multiple container collection with multiple products.</EPL_OFFICE_INSTRUCTION>
<EPL_START_PLANNED_DATE>20120320</EPL_START_PLANNED_DATE>
<EPL_START_PLANNED_TIME>00000000</EPL_START_PLANNED_TIME>
<EPL_END_PLANNED_DATE>20120320</EPL_END_PLANNED_DATE>
<EPL_END_PLANNED_TIME>00000000</EPL_END_PLANNED_TIME>
<EPL_DISTANCE_PLANNED>212</EPL_DISTANCE_PLANNED>
<EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>15 TEST ROAD</EPL_ADDRESS_1>
<EPL_ADDRESS_2>TESTINGTON</EPL_ADDRESS_2>
<EPL_ADDRESS_3>TEST</EPL_ADDRESS_3>
<EPL_ADDRESS_4>TESTside</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
</EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>16 Speke Boulevard</EPL_ADDRESS_1>
<EPL_ADDRESS_2>Speke</EPL_ADDRESS_2>
<EPL_ADDRESS_3>Liverpool</EPL_ADDRESS_3>
<EPL_ADDRESS_4>United Kingdom</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
<EPL_SO_NUMBER>SO-LOAD 46</EPL_SO_NUMBER>
<EPL_ORDER_DATE>20120319</EPL_ORDER_DATE>
<EPL_SALES_CONTACT>Jenny</EPL_SALES_CONTACT>
<EPOD_CONTAINERS>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-01</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
<EPOD_PRODUCTS>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-01</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD1</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-01</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD2</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
</EPOD_PRODUCTS>
</EPOD_CONTAINER>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-02</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
<EPOD_PRODUCTS>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-02</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD1</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-02</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD2</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
</EPOD_PRODUCTS>
</EPOD_CONTAINER>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-03</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
<EPOD_PRODUCTS>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-03</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD1</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001001</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001001-03</EPL_CONTAINER_ID>
<EPL_PRODUCT_CODE>TESTPROD2</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
</EPOD_PRODUCTS>
</EPOD_CONTAINER>
</EPOD_CONTAINERS>
</EPOD_JOB>
<EPOD_JOB>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_LOAD_ID>TEST001</EPL_LOAD_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_JOB_CODE>LINK-47</EPL_JOB_CODE>
<EPL_JOB_TYPE>D</EPL_JOB_TYPE>
<EPL_JOB_GROUP>JG01</EPL_JOB_GROUP>
<EPL_CUST_REF>CR-LOAD 46</EPL_CUST_REF>
<EPL_JOB_INSTRUCTION>Free Text Instructions</EPL_JOB_INSTRUCTION>
<EPL_OFFICE_INSTRUCTION>Containers and loose products. Linked to collection through Job Code</EPL_OFFICE_INSTRUCTION>
<EPL_START_PLANNED_DATE>20120320</EPL_START_PLANNED_DATE>
<EPL_START_PLANNED_TIME>00000000</EPL_START_PLANNED_TIME>
<EPL_END_PLANNED_DATE>20120320</EPL_END_PLANNED_DATE>
<EPL_END_PLANNED_TIME>00000000</EPL_END_PLANNED_TIME>
<EPL_DISTANCE_PLANNED>0</EPL_DISTANCE_PLANNED>
<EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>15 TEST ROAD</EPL_ADDRESS_1>
<EPL_ADDRESS_2>TESTINGTON</EPL_ADDRESS_2>
<EPL_ADDRESS_3>TEST</EPL_ADDRESS_3>
<EPL_ADDRESS_4>TESTside</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
</EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>16 Speke Boulevard</EPL_ADDRESS_1>
<EPL_ADDRESS_2>Speke</EPL_ADDRESS_2>
<EPL_ADDRESS_3>Liverpool</EPL_ADDRESS_3>
<EPL_ADDRESS_4>United Kingdom</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
<EPL_SO_NUMBER>SO-LOAD 46</EPL_SO_NUMBER>
<EPL_ORDER_DATE>20120319</EPL_ORDER_DATE>
<EPL_SALES_CONTACT>Jenny</EPL_SALES_CONTACT>
<EPOD_CONTAINERS>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001002-01</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
</EPOD_CONTAINER>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001002-02</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
</EPOD_CONTAINER>
<EPOD_CONTAINER>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_CONTAINER_ID>TEST001002-03</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX00</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Test Container</EPL_CONTAINER_PACKAGE_DESC>
<EPL_GROSS_WEIGHT>100.14</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG>1 PLT 800</EPL_DESCRIPTION_LONG>
</EPOD_CONTAINER>
</EPOD_CONTAINERS>
<EPOD_PRODUCTS>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD1</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD2</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD3</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD4</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD5</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001002</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD6</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
</EPOD_PRODUCTS>
</EPOD_JOB>
<EPOD_JOB>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_LOAD_ID>TEST001</EPL_LOAD_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_JOB_CODE>LINK-47</EPL_JOB_CODE>
<EPL_JOB_TYPE>C</EPL_JOB_TYPE>
<EPL_JOB_GROUP>JG01</EPL_JOB_GROUP>
<EPL_CUST_REF>CR-LOAD 46</EPL_CUST_REF>
<EPL_JOB_INSTRUCTION>Free Text Instructions</EPL_JOB_INSTRUCTION>
<EPL_OFFICE_INSTRUCTION>Containers and loose products. Linked to collection through Job Code</EPL_OFFICE_INSTRUCTION>
<EPL_START_PLANNED_DATE>20120320</EPL_START_PLANNED_DATE>
<EPL_START_PLANNED_TIME>00000000</EPL_START_PLANNED_TIME>
<EPL_END_PLANNED_DATE>20120320</EPL_END_PLANNED_DATE>
<EPL_END_PLANNED_TIME>00000000</EPL_END_PLANNED_TIME>
<EPL_DISTANCE_PLANNED>212</EPL_DISTANCE_PLANNED>
<EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>WAREHOUSE1</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>TEST Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>15 TEST ROAD</EPL_ADDRESS_1>
<EPL_ADDRESS_2>TESTINGTON</EPL_ADDRESS_2>
<EPL_ADDRESS_3>TEST</EPL_ADDRESS_3>
<EPL_ADDRESS_4>TESTside</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
</EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>WAREHOUSE1</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>TEST Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>15 TEST ROAD</EPL_ADDRESS_1>
<EPL_ADDRESS_2>TESTINGTON</EPL_ADDRESS_2>
<EPL_ADDRESS_3>TEST</EPL_ADDRESS_3>
<EPL_ADDRESS_4>TESTside</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
<EPL_SO_NUMBER>SO-LOAD 46</EPL_SO_NUMBER>
<EPL_ORDER_DATE>20120319</EPL_ORDER_DATE>
<EPL_SALES_CONTACT>Jenny</EPL_SALES_CONTACT>
<EPOD_PRODUCTS>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD1</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD2</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD3</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD4</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD5</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>1</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>X</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>12.3</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
<EPOD_PRODUCT>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001003</EPL_JOB_ID>
<EPL_PRODUCT_CODE>TESTPROD6</EPL_PRODUCT_CODE>
<EPL_SEQUENCE>0001</EPL_SEQUENCE>
<EPL_DESCRIPTION>TEST ITEM</EPL_DESCRIPTION>
<EPL_PRODUCT_QTY_PLANNED>12</EPL_PRODUCT_QTY_PLANNED>
<EPL_PRODUCT_QTY_ORDERED>1</EPL_PRODUCT_QTY_ORDERED>
<EPL_ITEM_TYPE>X</EPL_ITEM_TYPE>
<EPL_UNIT_TYPE>Y</EPL_UNIT_TYPE>
<EPL_DESCRIPTION_LONG>Long Description 2</EPL_DESCRIPTION_LONG>
<EPL_PRODUCT_WEIGHT>4.56</EPL_PRODUCT_WEIGHT>
</EPOD_PRODUCT>
</EPOD_PRODUCTS>
</EPOD_JOB>
<EPOD_JOB>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_LOAD_ID>TEST001</EPL_LOAD_ID>
<EPL_JOB_ID>TEST001004</EPL_JOB_ID>
<EPL_JOB_CODE>SERVICE</EPL_JOB_CODE>
<EPL_JOB_TYPE>S</EPL_JOB_TYPE>
<EPL_JOB_GROUP>JG01</EPL_JOB_GROUP>
<EPL_CUST_REF>CR-LOAD 46</EPL_CUST_REF>
<EPL_JOB_INSTRUCTION>Free Text Instructions</EPL_JOB_INSTRUCTION>
<EPL_OFFICE_INSTRUCTION>Service job</EPL_OFFICE_INSTRUCTION>
<EPL_START_PLANNED_DATE>20120320</EPL_START_PLANNED_DATE>
<EPL_START_PLANNED_TIME>00000000</EPL_START_PLANNED_TIME>
<EPL_END_PLANNED_DATE>20120320</EPL_END_PLANNED_DATE>
<EPL_END_PLANNED_TIME>00000000</EPL_END_PLANNED_TIME>
<EPL_DISTANCE_PLANNED>0</EPL_DISTANCE_PLANNED>
<EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>15 TEST ROAD</EPL_ADDRESS_1>
<EPL_ADDRESS_2>TESTINGTON</EPL_ADDRESS_2>
<EPL_ADDRESS_3>TEST</EPL_ADDRESS_3>
<EPL_ADDRESS_4>TESTside</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
</EPOD_CUSTOMER>
<EPL_CUSTOMER_CODE>Cust001</EPL_CUSTOMER_CODE>
<EPL_CUSTOMER_NAME>Customer Jones</EPL_CUSTOMER_NAME>
<EPL_ADDRESS_1>16 Speke Boulevard</EPL_ADDRESS_1>
<EPL_ADDRESS_2>Speke</EPL_ADDRESS_2>
<EPL_ADDRESS_3>Liverpool</EPL_ADDRESS_3>
<EPL_ADDRESS_4>United Kingdom</EPL_ADDRESS_4>
<EPL_POSTCODE>CH62 9GR</EPL_POSTCODE>
<EPL_CONTACT>TESTER Jones</EPL_CONTACT>
<EPL_TELEPHONE>08458795846</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
<EPL_SO_NUMBER>SO-LOAD 46</EPL_SO_NUMBER>
<EPL_ORDER_DATE>20120319</EPL_ORDER_DATE>
<EPL_SALES_CONTACT>Jenny</EPL_SALES_CONTACT>
<EPOD_SERVICE>
<EPL_SITE_ID>TEST</EPL_SITE_ID>
<EPL_JOB_ID>TEST001004</EPL_JOB_ID>
<EPL_SERVICE_ID>SID-TEST001004</EPL_SERVICE_ID>
<EPL_SERVICE_TYPE>I</EPL_SERVICE_TYPE>
<EPL_REG_NUMBER>X502ACB</EPL_REG_NUMBER>
<EPL_VIN_NUMBER>X502ACB</EPL_VIN_NUMBER>
<EPL_SIM_NUMBER>X502ACB</EPL_SIM_NUMBER>
</EPOD_SERVICE>
</EPOD_JOB>
</EPOD_JOBS>
</EPOD_LOAD>
</EPOD_LOADS>
</EPOD_IMPORT>
Sending Mechanism
The system provides web services for importing data. There are two mechanisms:
- Passing the data as a string, through Web Service EPOD_dataservice.asmx
- Passing the data as an XML object, through EPOD_dataservice2.asmx
The IP or web address of the CALIDUS ePOD server is not mapped into the Partnerlink network at this time, so the exact URL is unknown. This will be confirmed at a later date, for testing purposes.
For each data service, data can be sent via multiple methods, as shown below:
- EPOD_dataservice.asmx
SOAP 1.1
The following is a sample SOAP 1.1 request and response. The placeholders shown need to be replaced with actual values.
POST /webservices/dataservice/EPOD_dataservice.asmx HTTP/1.1
Host: www.calidus-web.com
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "ePOD_DataService/EPOD_XML_IMPORT"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<EPOD_XML_IMPORT xmlns="ePOD_DataService">
<IMPORT>string</IMPORT>
</EPOD_XML_IMPORT>
</soap:Body>
</soap:Envelope>
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<EPOD_XML_IMPORTResponse xmlns="ePOD_DataService">
<EPOD_XML_IMPORTResult>string</EPOD_XML_IMPORTResult>
</EPOD_XML_IMPORTResponse>
</soap:Body>
</soap:Envelope>
SOAP 1.2
The following is a sample SOAP 1.2 request and response. The placeholders shown need to be replaced with actual values.
POST /webservices/dataservice/EPOD_dataservice.asmx HTTP/1.1
Host: www.calidus-web.com
Content-Type: application/soap+xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
<soap12:Body>
<EPOD_XML_IMPORT xmlns="ePOD_DataService">
<IMPORT>string</IMPORT>
</EPOD_XML_IMPORT>
</soap12:Body>
</soap12:Envelope>
HTTP/1.1 200 OK
Content-Type: application/soap+xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
<soap12:Body>
<EPOD_XML_IMPORTResponse xmlns="ePOD_DataService">
<EPOD_XML_IMPORTResult>string</EPOD_XML_IMPORTResult>
</EPOD_XML_IMPORTResponse>
</soap12:Body>
</soap12:Envelope>
HTTP GET
The following is a sample HTTP GET request and response. The placeholders shown need to be replaced with actual values.
GET /webservices/dataservice/EPOD_dataservice.asmx/EPOD_XML_IMPORT?IMPORT=string HTTP/1.1 Host: www.calidus-web.com HTTP/1.1 200 OK Content-Type: text/xml; charset=utf-8 Content-Length: length <?xml version="1.0" encoding="utf-8"?> <string xmlns="ePOD_DataService">string</string>
HTTP POST
The following is a sample HTTP POST request and response. The placeholders shown need to be replaced with actual values.
POST /webservices/dataservice/EPOD_dataservice.asmx/EPOD_XML_IMPORT HTTP/1.1 Host: www.calidus-web.com Content-Type: application/x-www-form-urlencoded Content-Length: length IMPORT=string HTTP/1.1 200 OK Content-Type: text/xml; charset=utf-8 Content-Length: length <?xml version="1.0" encoding="utf-8"?> <string xmlns="ePOD_DataService">string</string>
- EPOD_dataservice2.asmx
SOAP 1.1
The following is a sample SOAP 1.1 request and response. The placeholders shown need to be replaced with actual values.
POST /webservices/dataservice/EPOD_dataservice2.asmx HTTP/1.1
Host: www.calidus-web.com
Content-Type: text/xml; charset=utf-8
Content-Length: length
SOAPAction: "ePOD_DataService/EPOD_XML_IMPORT"
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<EPOD_XML_IMPORT xmlns="ePOD_DataService">
<IMPORT>xml</IMPORT>
</EPOD_XML_IMPORT>
</soap:Body>
</soap:Envelope>
HTTP/1.1 200 OK
Content-Type: text/xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">
<soap:Body>
<EPOD_XML_IMPORTResponse xmlns="ePOD_DataService">
<EPOD_XML_IMPORTResult>xml</EPOD_XML_IMPORTResult>
</EPOD_XML_IMPORTResponse>
</soap:Body>
</soap:Envelope>
SOAP 1.2
The following is a sample SOAP 1.2 request and response. The placeholders shown need to be replaced with actual values.
POST /webservices/dataservice/EPOD_dataservice2.asmx HTTP/1.1
Host: www.calidus-web.com
Content-Type: application/soap+xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
<soap12:Body>
<EPOD_XML_IMPORT xmlns="ePOD_DataService">
<IMPORT>xml</IMPORT>
</EPOD_XML_IMPORT>
</soap12:Body>
</soap12:Envelope>
HTTP/1.1 200 OK
Content-Type: application/soap+xml; charset=utf-8
Content-Length: length
<?xml version="1.0" encoding="utf-8"?>
<soap12:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soap12="http://www.w3.org/2003/05/soap-envelope">
<soap12:Body>
<EPOD_XML_IMPORTResponse xmlns="ePOD_DataService">
<EPOD_XML_IMPORTResult>xml</EPOD_XML_IMPORTResult>
</EPOD_XML_IMPORTResponse>
</soap12:Body>
</soap12:Envelope>
Processing Responses
The response data is an XML file (either string data or an XML object), as shown in the calling methods above. The result is governed by a schema, in the same way that the import files are. All XSD schemas will be provided to you.
The import processor will validate the entire file to the import schema. If this fails, the file will be rejected - all errors found will be exported in the response file.
If the pre-process is successful, each record will then be attempted to be loaded. If any of these fail for any reason, the discovered error will be reported in the response file.
If the loading of all records proceeds without an issue, the acknowledged response will be sent.
Note: It is not recommended to attempt to resend files unless the errors have been investigated and resolved. This is the responsibility of the sending system or the users of that system to do this.
Note: It is recommended that this XML Response fragment is stored for later auditing of potential issues.
Note: The Result and Error tags will not be checked for content, only structure. Therefore these tags can contain any informative data that the producing system deems adequate for identifying issues.
An example of an Success and Failure response to an import into CALIDUS ePOD are shown below:
<EPOD_IMPORT_RESPONSE RESULT="NAK">
<ERRORS>
<ERROR error="The element 'EPOD_LOAD' has invalid child element 'EPL_SITE_IDX'. List of possible elements expected: 'EPL_SITE_ID'." exception="System.Xml.Schema.XmlSchemaValidationException: The element 'EPOD_LOAD' has invalid child element 'EPL_SITE_IDX'. List of possible elements expected: 'EPL_SITE_ID'."/>
</ERRORS>
</EPOD_IMPORT_RESPONSE>
<EPOD_IMPORT_RESPONSE RESULT="ACK">
<RESULTS>
<RESULT>
<ID>Load: LOAD001</ID>
<STATUS>Status: Load updated and at status C</STATUS>
</RESULT>
<RESULT>
<ID>Job: JOB001</ID>
<STATUS>Status: Job updated and at status P</STATUS>
</RESULT>
<RESULT>
<ID>EPOD_CUSTOMER: Cust001</ID>
<STATUS>Status: EPOD_CUSTOMER Updated</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB001-01</ID>
<STATUS>Status: Container created on Job: JOB001</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB001-02</ID>
<STATUS>Status: Container created on Job: JOB001</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB001-03</ID>
<STATUS>Status: Container created on Job: JOB001</STATUS>
</RESULT>
<RESULT>
<ID>Job: JOB002</ID>
<STATUS>Status: Job updated and at status X</STATUS>
</RESULT>
<RESULT>
<ID>EPOD_CUSTOMER: Cust001</ID>
<STATUS>Status: EPOD_CUSTOMER Updated</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB002-01</ID>
<STATUS>Status: Container created on Job: JOB002</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB002-02</ID>
<STATUS>Status: Container created on Job: JOB002</STATUS>
</RESULT>
<RESULT>
<ID>Container: JOB002-03</ID>
<STATUS>Status: Container created on Job: JOB002</STATUS>
</RESULT>
</RESULTS>
</EPOD_IMPORT_RESPONSE>
Importing into CALIDUS ePOD
CALIDUS ePOD Export Process
A process runs on a timed schedule within the CALIDUS ePOD application, to pick up any jobs that have been completed and export them to external systems.
The system be configured to ensure that updates are sent.
The exporting of this data will be modified to include:
- Entered Trailer ID (at Job level).
- Clause information (per pallet)
CALIDUS ePOD Export Message Content
A basic list if all the fields in the interface for Job follows. A full spreadsheet of all the export flows and fields containing all the limitations on length and defaulted values is provided separately.
EPOD_JOB
| Name | Description | External Field | Notes |
| EPL_SITE_ID | Unique Reference for the Site that the Job belongs to | ||
| EPL_JOB_ID | Unique reference for the job. If not provided on Import, this will be generated by EPOD | ||
| EPL_LOAD_ID | Unique Reference for the Load that the Job belongs to. If not provided, defaulted from the enclosing EPOD_LOAD | As Sent | |
| EPL_JOB_TYPE | D=Delivery, C=Collection, S=Service | "D" or "C" | As Sent |
| EPL_JOB_GROUP | As Sent | ||
| EPL_JOB_INSTRUCTION | Instructions for the Driver | As Sent | |
| EPL_JOB_SIGNATURE | The signature taken from the customer when the job was completed. This is in the form of a Base64-encrypted Jpeg file | x | |
| EPL_REASON_CODE | If a job has been cancelled, the reason code entered by the user is held here. | x | |
| EPL_LINKED_REASON | If the job is a delivery, and a collection of the same load with the same EPL_JOB_CODE is cancelled, this delivery will be cancelled, and this field will be set to "Y" | ||
| EPL_STATUS | C- complete, X cancelled | x | |
| EPL_CUSTOMER_CODE | Customer Code from external system. If not provided, one will be generated from EPL_CUSTOMER_NAME | ||
| EPL_PHOTO_ID | If cancelled, a photo may have been taken by the user. If so, this field is populated with a unique ID. | x | |
| EPL_PHOTO | The photo taken for the exception. This is in the form of a Base64-encrypted Jpeg file | x | |
| EPL_ENG_SIGNATURE | The signature taken from the driver/engineer when the job was completed, if required. This is in the form of a Base64-encrypted Jpeg file | x | |
| EPL_SEQUENCE | The sequence of the job. This could be the sequence sent on Import, a pre-defined sequence (if one was not provided) or a user-changed value (if enabled) | ||
| EPL_START_PLANNED_DATE | As Sent | ||
| EPL_START_PLANNED_TIME | As Sent | ||
| EPL_END_PLANNED_DATE | As Sent | ||
| EPL_END_PLANNED_TIME | As Sent | ||
| EPL_START_ACTUAL_DATE | The date the user actually chose to start the job. Format: YYYYMMDD | x | |
| EPL_START_ACTUAL_TIME | The time the user actually chose to start the job. Format HHMMSSNN | x | |
| EPL_ARRIVED_DATE | The date the user indicated they arrived at the destination. Format: YYYYMMDD | x | |
| EPL_ARRIVED_TIME | The time the user indicated they arrived at the destination. Format HHMMSSNN | x | |
| EPL_END_ACTUAL_DATE | The date the user completed or cancelled the job. Format: YYYYMMDD | x | |
| EPL_END_ACTUAL_TIME | The time the user completed or cancelled the job. Format HHMMSSNN | x | |
| EPL_DISTANCE_PLANNED | As Sent | ||
| EPL_DISTANCE_ACTUAL | N/A | ||
| EPL_DRIVING_TIME | N/A | ||
| EPL_CUSTOMER_NAME | The Name of the customer | As Sent | |
| EPL_JOB_ADDRESS | A flag indicating whether this is a default Customer Address or a specific address for this job alone. | N/A | |
| EPL_ADDRESS_1 | As Sent | ||
| EPL_ADDRESS_2 | As Sent | ||
| EPL_ADDRESS_3 | As Sent | ||
| EPL_ADDRESS_4 | As Sent | ||
| EPL_ADDRESS_5 | N/A | ||
| EPL_POSTCODE | As Sent | ||
| EPL_CONTACT | As Sent | ||
| EPL_TELEPHONE | As Sent | ||
| EPL_EMAIL | As Sent | ||
| EPL_INVOICED | N/A | ||
| EPL_CUST_SIGNATORY | The name of the customer signatory on the job. | x | |
| EPL_JOB_CODE | External reference for the Job. This element can be used to link a collection and delivery together under the same reference. So, if an order is being collected at A and delivered at B, there are 2 jobs, each with a unique Job ID, but with the same Job Code. Optionally, EPOD will keep the Delivery leg of a linked job updated with the information captured from the collection. | As Sent | |
| EPL_CUST_REF | Customer's Order Reference | As Sent | |
| EPL_OFFICE_INSTRUCTION | Instructions for Admin staff | As Sent | |
| EPL_SIGNED_UNCHECKED | An indication whether the customer signed for the goods without checking them first. Note that this field can be used for any check-box entry, as this is configurable. | x | |
| EPL_SO_NUMBER | Sales Order Reference. | As Sent | |
| EPL_TNCS | An XML fragment, displaying the Terms and Conditions agreed to by the customer when signing for the goods. This can also include up to 3 configurable check-boxes that the user may check. | x | |
| EPL_ORDER_DATE | Date Order created - defaulted to the date the order was received if not provided | As Sent | |
| EPL_SALES_CONTACT | The operative who took the order. Can be used as a display field for documentation | As Sent | |
| EPL_USER_NOTES | Optional Notes entered by the driver while completing the job. | x | |
| EPL_OWNER_NAME | As Sent | ||
| EPL_SERVICE_LEVEL | As Sent | ||
| EPL_LAST_CHANGED_DATE | The date the record was last updated. Auditing use only. | N/A | |
| EPL_LAST_CHANGED_TIME | The time the record was last updated. Auditing use only. | N/A | |
| EPOD_CONTAINERS | Contains a series of EPOD_CONTAINER objects, detailing all the deliverable items on this load. If there are loose products, there will also be a container with ID '000000000' holding these products. | A collection of pallets that were part of the job, plus the status. | |
| EPOD_SERVICE | If the job is a Service, this object holds all the service-related information. In that case, no containers or products will be specified against the job. | Applicable only to CALIDUS eSERV |
EPOD_CONTAINER
| Name | Description | External Field | Notes |
| EPL_SITE_ID | Unique Reference for the Site that the Job belongs to | ||
| EPL_JOB_ID | Unique reference for the job. If not provided on Import, this will be generated by EPOD | ||
| EPL_CONTAINER_ID | EPL_CONTAINER_ID: The unique identifier for a cotainer. | ||
| EPL_SEQUENCE | A sequence for the containers to be shown on the user's device. | As Sent | |
| EPL_CONTAINER_PACKAGE_CODE | As Sent | ||
| EPL_CONTAINER_PACKAGE_DESC | As Sent | ||
| EPL_REASON_CODE | If a container has been cancelled, the reason code entered by the user is held here. | x | |
| EPL_LINKED_REASON | If the job is a delivery, and a collection of this container on the same load with the same EPL_JOB_CODE is cancelled, this container will be cancelled, and this field will be set to "Y" | x | |
| EPL_STATUS | EPL_STATUS: Status of the current Container. C-Completed, X-Cancelled. | x | |
| EPL_PHOTO_ID | If cancelled, or received with a clause, a photo may have been taken by the user. If so, this field is populated with a unique ID. | x | |
| EPL_PHOTO | The photo taken for the exception. This is in the form of a Base64-encrypted Jpeg file | x | |
| EPL_CUST_COMMENTS | Optional entry by the user, indicating whether the customer has identified an issue with the received item (a claused receipt). If present, the customer may have requested an image, which would be contained in EPL_PHOTO. | ||
| EPL_DESCRIPTION_LONG | As Sent | ||
| EPL_CODE_1 | Multi-purpose field | As Sent | |
| EPL_CODE_2 | Multi-purpose field | As Sent | |
| EPL_CODE_3 | Multi-purpose field | As Sent | |
| EPL_LAST_CHANGED_DATE | The date the record was last updated. Auditing use only. | N/A | |
| EPL_LAST_CHANGED_TIME | The time the record was last updated. Auditing use only. | N/A | |
| EPOD_PRODUCTS | Contains a series of EPOD_PRODUCTS objects, detailing the products within the container, or loose products | N/A |
EPOD_PRODUCT
| Name | Description | External Field | Notes |
| EPL_SITE_ID | Unique Reference for the Site that the Job belongs to | As Sent | |
| EPL_JOB_ID | Unique reference for the job. If not provided on Import, this will be generated by EPOD | As Sent | |
| EPL_CONTAINER_ID | EPL_CONTAINER_ID: The unique identifier for a cotainer. | As Sent | |
| EPL_PRODUCT_CODE | The unique identifier for the product delivered/collected | As Sent | |
| EPL_SEQUENCE | A unique sequence for the product. | N/A | |
| EPL_DESCRIPTION | A 40-character description of the product | As Sent | |
| EPL_DESCRIPTION_LONG | A 255 character long description. Can be used to extend the description above. | As Sent | |
| EPL_PRODUCT_QTY_PLANNED | The quantity of the product to be delivered/collected | As Sent | |
| EPL_PRODUCT_QTY_ACTUAL | The actual quantity delivered/collected. | x | |
| EPL_PRODUCT_QTY_CASE | Not in use | N/A | |
| EPL_PRODUCT_QTY_ORDERED | The quantity of the product ordered. | As Sent | |
| EPL_REASON_CODE | If a product has been cancelled or the quantity has been chanegd, the reason code entered by the user is held here. | x | |
| EPL_LINKED_REASON | If the job is a delivery, and a collection of this product on the same load with the same EPL_JOB_CODE and EPL_CONTAINER_ID is cancelled, this product will be cancelled, and this field will be set to "Y" | x | |
| EPL_STATUS | EPL_STATUS: Status of the current Product. C-Completed, X-Cancelled. | x | |
| EPL_PHOTO_ID | If cancelled, or received with a clause, a photo may have been taken by the user. If so, this field is populated with a unique ID. | x | |
| EPL_PHOTO | The photo taken for the exception. This is in the form of a Base64-encrypted Jpeg file | x | |
| EPL_PRODUCT_WEIGHT | The item weight of this product | As Sent | |
| EPL_CUST_REF | Customer's Order Reference | As Sent | |
| EPL_ITEM_TYPE | A group defining the Product Type. | As Sent | |
| EPL_UNIT_TYPE | The Product UOM. | As Sent | |
| EPL_LAST_CHANGED_DATE | The date the record was last updated. Auditing use only. | N/A | |
| EPL_LAST_CHANGED_TIME | The time the record was last updated. Auditing use only. | N/A |
Note: Regarding Signature and Photo data formats in this message:
This data is stored and transmitted as a text string, Base64-encrypted. This data can be decoded and saved as binary data once received if required.
A sample of a single job with a single pallet is shown below:
<EPOD_EXPORT_JOB>
<EPOD_JOBS>
<EPOD_JOB>
<EPL_SITE_ID>L03</EPL_SITE_ID>
<EPL_JOB_ID>0000000001</EPL_JOB_ID>
<EPL_LOAD_ID>000000000002</EPL_LOAD_ID>
<EPL_JOB_TYPE>D</EPL_JOB_TYPE>
<EPL_JOB_GROUP>L03</EPL_JOB_GROUP>
<EPL_JOB_INSTRUCTION>Very Fragile Parcel..Please handle with Care</EPL_JOB_INSTRUCTION>
<EPL_JOB_SIGNATURE>R0lGODlh4AB4APcA...NKdJTY4EBAA7</EPL_JOB_SIGNATURE>
<EPL_REASON_CODE></EPL_REASON_CODE>
<EPL_LINKED_REASON>N</EPL_LINKED_REASON>
<EPL_STATUS>C</EPL_STATUS>
<EPL_CUSTOMER_CODE>OBS</EPL_CUSTOMER_CODE>
<EPL_PHOTO_ID></EPL_PHOTO_ID>
<EPL_ENG_SIGNATURE></EPL_ENG_SIGNATURE>
<EPL_SEQUENCE>1</EPL_SEQUENCE>
<EPL_START_PLANNED_DATE>20111108</EPL_START_PLANNED_DATE>
<EPL_START_PLANNED_TIME>12000000</EPL_START_PLANNED_TIME>
<EPL_END_PLANNED_DATE>0</EPL_END_PLANNED_DATE>
<EPL_END_PLANNED_TIME>0</EPL_END_PLANNED_TIME>
<EPL_START_ACTUAL_DATE>20111108</EPL_START_ACTUAL_DATE>
<EPL_START_ACTUAL_TIME>10490000</EPL_START_ACTUAL_TIME>
<EPL_END_ACTUAL_DATE>20111108</EPL_END_ACTUAL_DATE>
<EPL_END_ACTUAL_TIME>10520000</EPL_END_ACTUAL_TIME>
<EPL_DISTANCE_PLANNED>0</EPL_DISTANCE_PLANNED>
<EPL_DISTANCE_ACTUAL>0</EPL_DISTANCE_ACTUAL>
<EPL_DRIVING_TIME>0</EPL_DRIVING_TIME>
<EPL_CUSTOMER_NAME>OBS Logistics</EPL_CUSTOMER_NAME>
<EPL_JOB_ADDRESS>N</EPL_JOB_ADDRESS>
<EPL_ADDRESS_1>Southern Gateway</EPL_ADDRESS_1>
<EPL_ADDRESS_2>Speke Boulevard</EPL_ADDRESS_2>
<EPL_ADDRESS_3>Liverpool</EPL_ADDRESS_3>
<EPL_ADDRESS_4>Merseyside</EPL_ADDRESS_4>
<EPL_ADDRESS_5></EPL_ADDRESS_5>
<EPL_POSTCODE>L24 9HZ</EPL_POSTCODE>
<EPL_CONTACT>Xavier Wai</EPL_CONTACT>
<EPL_TELEPHONE>01514480331</EPL_TELEPHONE>
<EPL_EMAIL>[email protected]</EPL_EMAIL>
<EPL_INVOICED></EPL_INVOICED>
<EPL_CUST_SIGNATORY></EPL_CUST_SIGNATORY>
<EPL_JOB_CODE>L03</EPL_JOB_CODE>
<EPL_CUST_REF></EPL_CUST_REF>
<EPL_OFFICE_INSTRUCTION></EPL_OFFICE_INSTRUCTION>
<EPL_SIGNED_UNCHECKED></EPL_SIGNED_UNCHECKED>
<EPL_SO_NUMBER></EPL_SO_NUMBER>
<EPL_TNCS></EPL_TNCS>
<EPL_ORDER_DATE>0</EPL_ORDER_DATE>
<EPL_SALES_CONTACT></EPL_SALES_CONTACT>
<EPL_USER_NOTES></EPL_USER_NOTES>
<EPL_OWNER_NAME></EPL_OWNER_NAME>
<EPL_SERVICE_LEVEL></EPL_SERVICE_LEVEL>
<EPL_LAST_CHANGED_DATE>20120314</EPL_LAST_CHANGED_DATE>
<EPL_LAST_CHANGED_TIME>9420098</EPL_LAST_CHANGED_TIME>
<EPOD_CONTAINERS>
<EPOD_CONTAINER>
<EPL_SITE_ID>L03</EPL_SITE_ID>
<EPL_JOB_ID>0000000001</EPL_JOB_ID>
<EPL_CONTAINER_ID>000000000000001</EPL_CONTAINER_ID>
<EPL_SEQUENCE>0</EPL_SEQUENCE>
<EPL_CONTAINER_PACKAGE_CODE>XX</EPL_CONTAINER_PACKAGE_CODE>
<EPL_CONTAINER_PACKAGE_DESC>Pallet</EPL_CONTAINER_PACKAGE_DESC>
<EPL_REASON_CODE></EPL_REASON_CODE>
<EPL_LINKED_REASON></EPL_LINKED_REASON>
<EPL_STATUS>C</EPL_STATUS>
<EPL_PHOTO_ID></EPL_PHOTO_ID>
<EPL_CUST_COMMENTS></EPL_CUST_COMMENTS>
<EPL_GROSS_WEIGHT>120</EPL_GROSS_WEIGHT>
<EPL_DESCRIPTION_LONG></EPL_DESCRIPTION_LONG>
<EPL_CODE_1>1</EPL_CODE_1>
<EPL_CODE_2></EPL_CODE_2>
<EPL_CODE_3></EPL_CODE_3>
<EPL_LAST_CHANGED_DATE>20120614</EPL_LAST_CHANGED_DATE>
<EPL_LAST_CHANGED_TIME>16362322</EPL_LAST_CHANGED_TIME>
</EPOD_CONTAINER>
</EPOD_CONTAINERS>
<EPOD_SERVICES></EPOD_SERVICES>
</EPOD_JOB>
</EPOD_JOBS>
</EPOD_EXPORT_JOB>
Note: The signature has been shortened for the purposes of this document.
CALIDUS ePOD Export Mechanism
The system will be configured to send to a web service, requiring a string (rather than an XML object) input.
The identity of the web service will be defined by the TMS team as part of this development.
Each job will be sent independently, resulting in a single call to the external web service to add this job.
When the file is received and processed by the web service, the system expects the web service to respond in the format, as shown in previous sections. The exact same format and structure should be used as described here. The content may be as detailed as required by the TMS system.
