Owner Ware Parameters
From WMS
This screen is almost identical to the system parameters screen, with the exception of a few fields. Where possible the screen should be setup exactly as per system parameters.
Owner Ware Parameters - Main Tab
Note: For certain functionality such as barcode pallet labels this screen must be maintained.
| Field Name | Description | Options | Generic Value |
|---|---|---|---|
| Pick Note Lines ** | The maximum number of lines printed on a pick note | 0-99 | 99 |
| Pal Move Lines ** | The maximum number of lines on a pallet move ticket print | 0-99 | 99 |
| Auto Log Display ** | Check box to determine whether you wish to see the allocation log | Check box, Yes or No | Y |
| Area Code Length ** | Number of characters the area code will be | 0-4 | Defined by the client |
| Aisle Code Length ** | Number of characters the aisle code will be | 0-4 | Defined by the client |
| Bay Code Length ** | Number of characters the bay code will be | 0-4 | Defined by the client |
| Level Code Length ** | Number of characters the level code will be | 0-4 | Defined by the client |
| Location Code Delimiter | States which delimiter will be used within the location code i.e. A1-001-01 | 1 - No Delimiter 2 - Space 3 - Forward Slash / 4 - Colon : 5 - Back Slash \ 6 - Underscore _ 7 - Minus - |
3 |
| Location Check Digits | Allows the user to state whether they will use check digits and which processes will use them | Y - All Processes N - No Processes * - Stock Movements and GRN |
N |
| Interface Flag ** | Used for RDT to determines whether RF functionality will be used | Check box Y or N - default is N | N |
| Pick by Component ** | Determines whether a product can be picked as a component (kits) | Check box Y or N - default is N | N |
| Max Rot Length ** | Maximum length of the system rotation number | 0-14 | 11 |
| Rotation Type ** | Determines whether system rotation numbers will be used and how they will be used | S - Sell by date O - Generated with manual override G - Generated M - Manual Entry B - Back Date/Seq R - Rotation |
G |
| Use Average Cost | Y or N | N | |
| Share Product Flag | Y or N | N | |
| Pallet Label Copies ** | Sets the number of auto-generated labels to be produced | 01-Apr | 1 |
| Case Label Copies | Sets the number of auto-generated case labels to be produced | 01-Apr | 1 |
| Auto Label Production ** | Defines whether labels are produced without user intervention | Y or N | Y |
| Other Pallet Label | The ability to enter an additional label format if required | Must be a valid format or left blank | Blank |
| Both Pallet Label Flag ** | Determines whether a pallet and case label should be produced automatically | Check box Y or N - will default to N | N |
| Height of Pick Pallet (cm) | Used for pallet levelling - determines the height of the pick pallet (not migrated) | 0 - 99999 | 0 |
| Height of Pick Pallet ** | The specific height of the pallets to be stored in pick locations | 0-9999 | 20 |
| Warehouse Display Code | Enables the autogeneration of ware_last_numbers (not migrated) | 0-Z or leave blank | 1 |
| Buying Responsibility ** | Used in purchase order suggestion to dictate the source of receipts | Internal check box or external check box | External |
| Display On Hand in Stocktake ** | Determines whether on hand can be displayed on stock take count sheets | Yes or No | Yes |
| Print Location on Label ** | Specifies whether the location code will be printed on the receipt label | Yes or No | Yes |
| Pallet Level Flag ** | Dictates at which point pallet levelling will be carried out | N - None P - Pallet Fill Factor C - By No. of Cases |
None |
| Dec Pallet Break | Decimal value | ||
| Cases Pallet Break | Integer value | ||
| EDI Setting of Sales Order Number | Use Extra Reference
Use Sellers Order Reference Use Customer PO Reference Generate System Order Number |
Generate System Order Number | |
| EDI Sales Order Number Prefix | Prefix with Owner Code
No Order Prefix |
||
| Enable Consolidated Print Control | Yes or No | ||
| Reduce Stk At ** | At which WH process will the stock levels be reduced? | Pick Confirmation
Despatch Confirmation |
|
| ASN Supplier Party ID | |||
| Check Stock Date | Warning Message Required
Error Message Required No check required at pick conf |
Owner Ware Parameters - Goods In Tab
| Field Name | Description | Options | Generic Value |
|---|---|---|---|
| Auto Putaway Flag ** | Determines whether the warehouse will be utilising autoputaway. i.e. the system will suggest the locations to receive into | Y or N | Defined by the client |
| Opposite Aisle Param | Sets the number of locations the autoputaway will go through before moving to the opposite aisle | 0-4999 - will default to 0 | 999 |
| Next Aisle Param | Sets the number of locations the autoputaway will go through before moving to the next aisle | 0-4999 - will default to 0 | 999 |
| GRN Check Sheet ** | Is a GRN Check sheet required at pre advice? | Y or N | N |
| Bonded Units Caged ** | Will the warehouse be brining in non-duty paid stock stored in cages? | Y or N | N |
| GRN Consolidation | Specifies whether you wish to generate replenishments at receipt | N - None B - Pick Replen. & Partial Bulk P - Pick Replen. during GRN Part Pick Receipt |
N |
| Hold In Putaway ** | Determines whether you wish stock to be automatically put on hold until putaway confirmation has been completed | Check box - Y or N | Y |
| Number of Bays | Transport field - not used - specifies no. of bays to be loaded into | 0-9999 | 0 |
| Slot Start Time | Transport field - not used - defines when the receiving starts | 00:00 - 23:59 | 00:00 |
| Slot Length (mins) | Transport field - not used - defines how long a truck can be at the bay | 1-600 | 1 |
| Number of Time Slots | Transport field - not used - defines how many slots can be used in one day | Jan-99 | 1 |
| Diary Cleardown Period (days) | Transport field - not used - defines how many days before the diary is cleared down | Jan-99 | 1 |
| Diary Create Period | Transport field - not used - defines the number of days to be generated by the diary | 1-999 | 1 |
Owner Ware Parameters - Default Locations Tab
| Field Name | Description | Options | Generic Value |
|---|---|---|---|
| ID Station | Receipt ID Station | Predefined in locations maintenance | Blank |
| Reject Spur at ID Station | Client Specific -spur locations | Predefined in locations maintenance | Blank |
| Q/A | Default quarantine location | Predefined in locations maintenance | Blank |
| Turntable | Default turntable locations | Predefined in locations maintenance | Blank |
| Input Spur to Conveyor | Client specific - spur locations | Predefined in locations maintenance | Blank |
| Default Marshalling Location ** | Required to enable picking and allocation to function | Predefined in locations maintenance | Defined by client |
| Default Despatch Bay Location | Default Outbound Bay Location | Predefined in locations maintenance | Blank |
| Pre Advice Virtual Location | Default receiving staging area | Predefined in locations maintenance | Blank |
| Quarantine in Marshal | Default additional quarantine stage within the outbound process | Predefined in locations maintenance | Blank |
| Auto bulk Reject | Client Specific - Default rejection location | Predefined in locations maintenance | Blank |
| Default Ship Pallet Build Locn | Used in Shipment Pallet Building as default staging area | Predefined in locations maintenance | Blank |
| Default Damages | Default damages location for putaway | Predefined in locations maintenance | Blank |
| Default Cons Good Ret | Predefined in locations maintenance | Blank | |
| Default Cons Bad Ret | Predefined in locations maintenance | Blank | |
| Bonded Putaway Locations | 3 x Warehouse level anchor point for autoputaway for bonded warehouses | Predefined in locations maintenance | Blank |
| Unbonded Putaway Locations | 3 x Warehouse level anchor point for autoputaway for duty paid warehouses | Predefined in locations maintenance | Blank |
Owner Ware Parameters - Consolidated Pallet Tab
| Field Name | Description | Options | Generic Value |
|---|---|---|---|
| Owner Code | The Owner Code and Name | Display only | |
| Pick List | An option of whether the Pick List is consolidated, plus the default printer name. | Yes or No | |
| Out of Stock | An option of whether the Out of Stock is consolidated, plus the default printer name. | ||
| Replenishment | An option of whether the Replen List is consolidated, plus the default printer name. | ||
| Despatch Note | An option of whether the Despatch Note is consolidated, plus the default printer name. | ||
| Shipping Label | An option of whether the Shipping Label is consolidated, plus the default printer name. |
Owner Ware Parameters - Cubing Tab
This tab covers the options available for cubing of pallets during the picking process.
| Field Name | Description | Options | Generic Value |
|---|---|---|---|
| Cubing Required | Whether the owner uses the Cubing functionality. | Option select Yes or No | No |
| Replens Lower Priority | Whether to lower the priority of any replens when executing them through the WCS | Option select Yes or No | Yes |
| Allow SKUs on Split Pallets | Whether order lines/SKUs can be split across multiple picking pallets, or whether the full line quantity must stay on one picking pallet. | Option select Yes or No | Yes |
| Build Height (cm) | The target build height. | Decimal | As required. |
| Max Build Height (cm) | The maximum build height | Decimal | As required. |
| Min Build Height (cm) | The Minimum build height | Decimal | As required. |
| Final Sortation of Page | How the tasks and/or pick list will be sorted for picking. | By Strength
By Location As Built |
By Strength |
