Bulk PI Functions

The purpose of this document is to step through the Bulk PI process from WMS into WCS and back again, to see the process.

Confirming a Quantity

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; check a location where a pallet exists and enter the correct quantity.

Pallet 88 in location 01/13/2:

Checked the pallet using the Bulk PI module as follows:

Checked the pallet and it was still showing as quantity 50:

Changing a Quantity

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; check a location where a pallet exists and enter a different quantity.

Created pallet 89 in location 01/13/3:

Checked the pallet using the Bulk PI module as follows:

Checked the pallet and it was still showing as quantity 50:

Zeroing a Quantity

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; check a location where a pallet exists and enter a zero quantity

Created pallet 90 in location 01/13/4:

Checked the pallet using the Bulk PI module as follows:

Checked the pallet and it was still showing as quantity 50:

Check an Empty Location

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; check an empty location.

Created empty location 01/13/5.

Checked the pallet using the Bulk PI module as follows:

.

Add a Pallet to an Empty Location

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; pallet added to an empty location

Created empty location 01/13/5.

Added a pallet to the location using the Bulk PI module as follows:

Add a Pallet to a Non-Empty Location

Standard processing:

Data Setup: Owner Rule RBNA set to 'Y'

Process; pallet added to a non-empty location

Created pallet 91 in location 01/13/6:

Checked the pallet using the Bulk PI module as follows and also added another pallet: