Did You Know
This guide is intended to help you discover features delivered with the CALIDUS ePOD application.
Mobile Device Application
Job Reference
The Job Reference shown on the device in all the screens is controlled through configuration against the Site, through the "Display Job Code on PDA" setting. You can configure it to show:
- Job ID.
- Job Code.
- SO Number.
- Customer Ref.
- External Ref.
What you select here will be used on the device, as long as it contains a value.
If there isn't a value, the job code (the order number) will be displayed instead.
If there isn't a job code, the device will display the unique job ID (generated by CALIDUS ePOD).
The screens that display this are:
- Job List (the list of all jobs on the load)
- Job Details (when starting or arriving)
- Collection/Delivery screens (when confirming pallets)
- Customer/Driver Signature screen
On the device, there is also some functionality available to show all the references that the system holds against a particular job.
Simply click the job reference label and the device will show a popup of all the references for that job:
- Job ID:
- Job Code:
- SO Number:
- Customer Ref:
- External Ref:
This functionality is available on the following screens:
- Job Details
- Collection/Delivery
It is not available on the Signature screen, however.
References:
On TomTom WEBFLEET devices, when you click the map icon on the Job Details screen, the application will switch to the WEBFLEET navigation app, where the order required can be selected from WEBFLEET's Work List.
However, the CALIDUS app also allows you to directly navigate to the job address instead. If you long-press on the map icon it will display a list of "Navigate without WEBFLEET Order?" options:
- Once - Only this job will navigate directly to the job address.
- Remember for Load - the button will default to navigate directly to the job address for all jobs on the load.
Long-pressing the map button again will give "Navigate with WEBFLEET Order?" options, allowing this to be reset.
References:
Adding Extra Data Entry
CALIDUS ePOD includes the ability to add additional data entry prompts at many stages - this is called User Defined Fields and User-Defined Forms, or UDF for short.
You can add any number of any type of data entry fields to the following mobile device screens:
- Vehicle Checks - for different vehicle types.
- Load Start.
- Job Arrival Signatures.
- After arrival.
- Collection/Delivery Details.
- Additional Container information.
- Additional Product information - for individual product groups.
- Service Pre-checks - for different product groups.
- Service Information - for different product groups.
- Service Diagnosis - for different product groups.
- Service Post-checks - for different product groups.
- Terms and Conditions for customers and drivers for different job types.
- Exceptions - when cancelling, changing or clausing, and can be dependent on the reason code selected.
- Load End.
The configuration can be based on site or the job group the job is in. Other configuration levels are also available and indicated above. When part of a job matches this criteria, the UDF is displayed on the screen for entry.
References:
Administrative Console
Opening Multiple Tabs
Sometimes you will find it useful to have multiple pages open from the CALIDUS ePOD Admin application, for example for looking up customers.
Any link (usually denoted with an underline) in a page can be clicked while the Control key (Ctrl) is held down, and that will generally open up in a new tab or window on the machine.
Screens can be started in another tab or window from the menu - click the icon to the right of the menu item, and this will open in a new tab or window.
Note: This functionality is typically dependent on the capabilities of the browser being using, so check capability and settings.
Note: The last screen you open from the menu is the screen for which help will be displayed when you click the Help on this screen button in the screen title - opening multiple tabs like this may result in unexpected results, so in this case it is better to search for or navigate to the screen for which you require help using the CALIDUS Assist home page and search facilities.
References:
Adding Data to Results tables
Most screens allow the columns in the results table to be shown or hidden using a Select Columns button. When pressed, a pop-up is shown of all the columns that can be selected.
There are some columns that may not be hidden and these will not be shown on this list.
To show or hide the columns, check or un-check the items in the list respectively. When you click Save, the changes will be applied to the results table. If you click Close (or anywhere else on the screen behind), the screen will not make the changes.
The application will remember your settings for this screen when run from the same browser on the machine.
References:
Tracking on a Map
The mobile device commonly tracks its position and tells the system where it was when actions are taken. The system stores this information and can be displayed in the User Tracking screen.
This screen can be used on its own to select data and then see the point on a map, if co-ordinates are provided.
However, you can also see this from different areas of the system, pre-selecting the data based on from where the screen was called:
- Vehicles
- Users
- Loads
- Jobs
When you go to the User Tracking screen from these screens, the data is pre-selected based on from where it was called. Further, the screen will also display a Map button in the header, which will show all the tracking waypoints linked together.
References:
Customising the Logo
You can change the logo displayed in the top-left of the Admin system if you want to.
This can be changed in the Site screen.
Note: When you change this, it changes for all Admin users who use this site.
References:
Customising Completion Reports
At this time, OBS Logistics design all completion (POD/POC/Service) reports. However, there are normally some elements that you can easily change in the system.
If you change the Site or Job Group logo, this will typically change the logo displayed in the Completion report.
If you change the Site Name, Address and contact details, this will typically change the address in the Completion report. Simply find the customer with the same code as the Site ID and change it there.
Alternatively, some reports use the Job Group address instead - simply find the customer with the same code as the Job Group and change it there.
References:
Maintaining Reference Data
If you are more comfortable maintaining standing reference data in a spreadsheet, you can achieve this in CALIDUS ePOD as well.
Several Standing Data Maintenance screens allow you to:
- Download a template.
- Download existing standing data.
- Upload new or modified data.
The reference data that can be modified this way is:
- Codes - including reason codes, DU types, UOMs and Clause codes.
- Vehicles.
- Service Products.
- Service Activities.
- Vehicle Products.
- Customers.
- Time and Expense categories.
- Users - drivers and admin users.
The screen will usually show you an Upload button to show these options.
Note: Be aware that, if CALIDUS ePOD is linked to a transport management system, it's likely that all this standing reference data is updated automatically from that system, so check before modifying data in CALIDUS ePOD.
References:
- Codes
- Vehicles
- Service Products
- Service Activities
- Vehicle Products
- Customers
- Time and Expense Categories
- Users
Downloading Photos
When the driver completes jobs, part of their process may be to take photos on the device. These photos are stored back in CALIDUS ePOD and you can view them in various screens, like the Jobs screen - you can click on a job, use the Select action button and click on the Photos tab to view any photos that were taken.
Your browser can also view, zoom in and download the photos directly from this screen. The process is slightly different per browser - the instructions for Chrome follow.
To view the photo full-screen:
- right-click on the photo and select Open image in new tab.
To zoom in:
- Use Chrome's web page zoom commands from the main Chrome menu. -
- As a shortcut to this, you can hold down the control (Ctrl) key on your keyboard and scroll up to zoom in, or scroll down to zoom out.
To download the photo:
- Right-click on the photo and select Save image as....
- In the pop-up Save as file browser, name the file and save it to anywhere on your PC or network-accessible area.
You can do this from the image in CALIDUS ePOD or on an image you opened full-screen.
Note: This functionality is typically dependent on the capabilities of the browser being using, so check capability and settings.
References:
CALIDUS Assist
Printing and Exporting
You can export pages from CALIDUS Assist using the Download as PDF link in the Toolbox menu, typically on the left.
You can export categories as a full document in the same way - all pages in that category will be included in the PDF in the order in which they are listed in the category.
